Ruby is the birthstone for the month of July. It's the gem for the 15th and 40th anniversaries. 


Varieties of the Mineral Corundum
Ruby and sapphire are varieties of the mineral corundum. - Courtesy Hamilton Jewelers
Ruby is the most valuable variety of the corundum mineral species, which also includes sapphire. Rubies can command the highest per-carat price of any colored stone. This makes ruby one of the most important gems in the colored stone market.
In its purest form, the mineral corundum is colorless. Trace elements that become part of the mineral’s crystal structure cause variations in its color. Chromium is the trace element that causes ruby’s red, which ranges from an orangy red to a purplish red.
The strength of ruby’s red depends on how much chromium is present—the more chromium, the stronger the red color. Chromium can also cause fluorescence, which adds to the intensity of the red color.
The most renowned rubies, like those from Myanmar, the Himalayas, and northern Vietnam, typically form in marble. They’re found in layers that are distributed irregularly within the surrounding marble. Marble forms as part of the metamorphic (rock-altering) process, when heat and pressure from mountain formation act on existing limestone deposits.

Rubies in Marble Deposits
Rubies found in marble deposits often have a vibrant red glow.
Marble has low iron content, so the rubies that originate in marble (called “marble-hosted” by gemologists) lack iron. Because of this, many have an intense red color.
In addition, rubies found in marble typically fluoresce red under ultraviolet light—even the ultraviolet light in sunlight. Fluorescence can make a ruby’s color even more intense and increase its value.
In other locations, rubies can be found in basalt rocks. Rubies from these sources can have higher iron content, which can make the rubies darker and less intense in color. Higher iron content in the chemical makeup of a ruby can also mask the red fluorescence, eliminating that extra glow of red color seen in marble-hosted rubies.
11.01-carat Ruby
Fine-color, large, and eye-clean (lacking visible inclusions) rubies like this 11.01-carat stone from Myanmar are extremely rare and valuable. - Courtesy Jan Goodman Co.
Ruby can command the highest prices of any colored gemstone.  The per-carat prices of fine-quality rubies have been rising consistently, many times breaking auction records.

For better-quality material, slight differences in color can make significant differences in value. For top-color ruby that’s also free of eye-visible inclusions, the price rises even more.

The per-carat price of ruby can also increase dramatically as size increases, especially for better-quality stones.

Untreated and Heat-treated Rubies
These untreated and heat-treated rubies show a range of darker and brighter red colors.
Color is the most significant factor affecting a ruby’s value. The finest ruby has a pure, vibrant red to slightly purplish red color. As the color becomes too orangy or more purplish, the ruby moves down the quality scale. The highest-quality rubies have vivid color saturation.

The color must be neither too dark nor too light to be considered finest quality. If the color is too dark it has a negative effect on the stone’s brightness. At the other extreme, if the color is too light, the stone is considered pink sapphire, even if color strength or intensity is high.

Some gem dealers debate the borderline between ruby and pink sapphire. Historically, the word ruby referred to shades of red, which technically included pink. There are also cultural differences in the interpretation of ruby versus pink sapphire. In some gem-producing nations such as Sri Lanka, pink colors were always considered ruby, while in many consuming countries it is classified as pink sapphire.

The GIA Laboratory uses a controlled set of comparison stones called masterstones to determine if corundum is ruby or if it’s pink, purple, or orange sapphire. The laboratory grades its masterstones on the principle that red must be the dominant hue before a stone can be called a ruby. In the gem trade, though, identification of the dominant hue is subject to personal perception.

Blood is another symbol of ruby’s color. Descriptions have compared ruby to the “blood from the right ventricle” or the first two drops of blood from a freshly killed pigeon. Historically, the term “pigeon’s blood” described the red to slightly purplish or pinkish red color of rubies with a soft, glowing, red fluorescence.

Traditional descriptions like these are useful for evoking images and describing color among professionals. But they can be subject to misinterpretation when used to describe a ruby’s actual color.

Trade terms can represent certain colors and qualities that are associated with a stone’s source. The qualities might be typical of that source or they might represent the finest stones from that source.

But a single source never consistently yields gems that are all the same color and quality. In fact, the descriptive term might represent only a small percentage of stones from that source. The appearance of stones from a particular source often varies over time, and the original quality associated with that source might no longer match the material produced.

New sources can produce material very similar to rubies from classical sources or with a slightly different appearance, but just as beautiful. 


Intersecting needles of the mineral rutile create a common ruby inclusion called silk. When they are intact, they prove the ruby was not heat-treated at very high temperatures. It’s still possible that lower-temperature heat treatment might have occurred.
People in the trade expect rubies to have at least some inclusions because inclusion-free rubies are practically nonexistent. Ruby value depends on how visible the inclusions are. Obvious inclusions or inclusions that reduce transparency or brightness lower a ruby’s value dramatically.
If large and prominent inclusions are located under the table facet, they greatly diminish the transparency, brilliance, and value of the stone. Inclusions can also limit a ruby’s durability. Significant surface-reaching fractures can pose durability threats.

Typical ruby clarity characteristics include thin mineral inclusions called needles. When the mineral is rutile and needles are present in intersecting groups, it is called silk. Needles might be short or long and slender, and they might appear to be woven tightly together.

Ruby can also contain needles composed of other minerals, small crystals, zones of color variation, or inclusions that resemble fingerprints.

Some inclusions can actually contribute positively to a gem’s appearance. The presence of rutile silk causes light to scatter across facets that might otherwise be too dark. This adds softness to the color and spreads the color more evenly across the ruby’s crown.

Needles that intersect can also cause the star effect, called asterism, when the stone is cut with a curved upper surface.

The Star Effect
Long mineral inclusions that intersect can create the star effect when stones are cut as cabochons. - Courtesy Courtesy of Hussain Rezayee, Rare Gems & Minerals

Various Cuts of Rubies
Rubies are commonly cut into oval and cushion shapes. - Courtesy Edward Boehm
Several factors affect the cut and proportion of rubies on the market. A ruby’s crystal shape dictates its suitability for certain cuts. The most common shape is a flat tabular hexagonal shape, but ruby crystals from some sources can be elongated.

To accommodate these crystal shapes, the most common shapes of fashioned rubies are ovals and cushions, with brilliant-cut crowns of kite-shaped and triangular facets, and step-cut pavilions with concentric rows of rectangular or square facets.

Round, triangular, emerald-cut, pear, and marquise rubies are also available. But these shapes are rare in larger sizes and higher qualities.

Ruby rough is very expensive, so cutters try to conserve as much weight as possible. They might fashion flattened ruby rough into shallow stones, even though light escapes through flattened pavilions, causing an unattractive see-through area in the stone called a window.

Pleochroism—the appearance of different colors in different crystal directions—is another factor that influences cut. In ruby it typically appears as red to purplish red in one crystal direction and orangy red in the other. Cutters can minimize the orangy red color by orienting the table facet perpendicular to the long crystal direction. Even so, it’s not always possible to orient a ruby for ideal color return because the potential loss of weight would be too great.

Size and Weight

Rubies from Myanmar
These rubies were all mined in Myanmar. The faceted stone weighs 11.55 carats and the rough stones weigh between 16.65 carats and 278.50 carats.
Fine-quality rubies over one carat are very rare, but commercial-quality rubies are commonly available in a wide range of sizes. The price per carat goes up significantly for ruby as it increases in size.

For example: A commercial-quality 5-carat ruby might sell for about twice as much per carat (10 times total stone value) as a commercial-quality 1-carat ruby, while a fine-quality 5-carat ruby sells for over five times more per carat (25 times total stone value) than a fine-quality 1-carat ruby.
These examples are not meant for exact pricing guidelines, but to illustrate how much the per-carat price can go up as the size and the quality rise.
ALL CONTENT IS FROM:"Ruby." GIA. N.p., n.d. Web.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Please sign in to leave a comment.